Actual problems of modern science: Abstracts of XV International scientific-practical conference (St. Petersburg - Astana - Kyiv - Vienna, December 28, 2016)
Actual problems of modern science: Abstracts of XV International scientific-practical conference (St. Petersburg - Astana - Kyiv - Vienna, December 28, 2016)
Аннотация: исследованы теоретические вопросы построения графиков с применением MathCad.
Ключевые слова: вектор, плотность заряда, интервал, теорема Остроградского-Гаусса.
Summary: Theoretical questions about the calculation of the electromagnetic field winding machines AC.
Key words: electromagnetic field, alternative current machines.
Annotation. The results of experimental investigations of the dynamics movement the overhead crane with optimal and manual control.
Keywords: optimal control, manual control, dynamic load, load fluctuations, optimization.
Summary: According to available literature data investigated the feasibility of using membrane bioreactors (MBR) for the treatment of industrial waste water and to determine the advantages and disadvantages of this method compared to traditional. Also, work, analysis of existing ways of dealing with clogging pores in the membranes MBR and selected the most effective of them showing the advantages and disadvantages of the latter.
Key words: clogging pores, membrane bioreactor, wastewater.
Abstract: At present, more and more people suffer from gastro-intestinal diseases. outdated methods of diagnosing are used in medical practice, that may damage internal organs. Modern medical robotics could address this issue, as developed a secure capsule robot gastroenterology.
Keywords: Robot, research, robotic surgery, force-torque sensor.
Summary: Main features of project management in revitalization of industrial buildings are illuminated. Key difficulties that revitalization developer face are stated. Practical advises on increase of project realization efficiency are given.
Key words: revitalization, reconstruction, project management, industrial buildings, investments.
Summary: Body automotive devices, usually include the body, frame doors, the body is made from stamped sheets connected by welding with the supporting frame. To this frame are mounted the doors, hood, roof, and bottom. Well-known designs with high strength and stiffness to increase safety for operators in emergency situations.
Key words: speed knives, destructible element, the deformation of the cabin design.
Summary: Choosing an optimal control is closely linked to the assessment of operations. There is the analysis of operation assessment by using of low-cost method in the work. The cases in which the indicator "costs" can be coordinated with the performance operations are identified.
Key words: costs, operational efficiency, optimization criterion, efficiency criterion.
Summary: A method analysis of satellite cloud maps by defining quantitative indicators of color, in particular concentration. An amount of cloudiness results change over time.
Key words: cloudy, satellite maps, images, concentration, mass cloud center of mass of clouds, perimeter color, area color, cloudiness, satellite maps, images, concentration, mass cloud center of mass of clouds, perimeter color, area color.
Annotation: The article suggests dynamic mechanical model allows to simulate dynamic processes start and "pounced" load on the shaft of the induction motor, as well as to determine the starting points in the various laws regulating the speed of automatic control systems.
Key words: asynchronous motor, simulation, mechanical characteristic, voltage, frequency, engine idling, starting torques.
Summary. Development of methods for determining the optimum amount of gas supply sources that will help increase the efficiency and reliability of their work and reduce the operating costs for maintenance.
Keywords: gas network, gas-distributing station, gas control point, flow rate, flow capacity, energy efficiency.
Summary. The possibility reduce pollution that causes milk production by organizing the process of purification of whey from protein. The authors suggested construction of filter for treatment whey.
Key words: waste, filtering, whey, purification, protein.
Actual problems of modern science: Abstracts of XІV International scientific-practical conference (St. Petersburg - Astana - Kyiv - Vienna, November 29, 2016)
Summary: The computational model of additional errors, which occur from interaction of intense shock N-wave with inertial positioning devices of hypersonic aircraft was built. Angles of coincidence for the industrial design of the angular velocity sensor were fitted. A comparative analysis of the experimental data for seminatural conditions for the two cases (gyroscope ON, gyroscope OFF) was made. Conclusions about the possibility of use of the results were made.
Key words: N-wave, hypersonic aircraft, caustic zone, wave coincidence, float gyroscope.
Summary. In article parametres of influence of a site of a broadband network of user's access, and also quality indicators are considered by transfer on networks of the traffic of a various kind.
Аnnotation: The industrial robots using positioning the stops to reduce dynamic loads and reduce the dynamic error component used special damping devices. However, when changing the speeds of the masses and working organs (PO) in a wide range such devices require the adjustment of its parameters. The use of shock absorbers as elastic thrusts allows for the maximum speed of the PO and the reduction of dynamic loads at the time of hitting the fence.
Necessary characteristics depreciation quality can be obtained as a result of the construction of systems with variable structure, which are due to discontinuous control essentially nonlinear systems. Operation of the system variable structure provides instant removal and restoration, using the logic switching elements, relations between its individual links and the use of local mineral properties of these units [1]. In the energy aspect of the amortization of the system of variable structure are more advantageous than the active vibration isolation system as well as the energy they expended only on the parameters of control.
Keywords: control, pneumatic shock absorber movement.
Summary: Covering performance comparison of existing object-relational mapping on the database used in project in telecommunications business area. Demonstrated graphical comparison of performance on different types of requests.
Key words: SQL Server, databases, object-relational mapping, performance, Ado.Net. Entity Framework, NHibernate, LINQ2SQL, software.
Annotation: In the article the feasibility of an automatic control system for the conveyor belt tension and alignment of its motion in the horizontal plane.
Key words: ribbon, belt, drum, tensioning station, sensor, actuator device.
